2023 Wacker Neuson Hydronic Heaters E1250 E1250S
- Year 2023
- Make Wacker Neuson
- Model Hydronic Heaters E1250
2023 Wacker Neuson Hydronic Heaters E1250 E1250S
2023 Wacker Neuson Hydronic Heaters E1250 E1250S
Hydronic Heaters E1250: easy to transport, simple to use hydronic heater.The E 1250 was designed with the safety features you require and the simple, intelligent operation you desire. All operator interface points are conveniently located in the rear of the machine for simplified operation. Our new concrete cure mode simplifies the guesswork in maintaining proper concrete temperature, and our user-friendly control panel incorporates a watchdog circuit, E-Stop, and single point reset for the most common faults. All versions are telematics ready.
Features may include:Powerful positive displacement pumps
- Positive displacement pumps allow for strong continuous flow and high head height.
Heated control panel
- Heated 5-inch backlit display control panel shows machine status, GFCI protection and advanced diagnostics mode with large, low-voltage toggle switches
Brakes
Brake System Type
Electric
Wheels & Tires
Wheels
ST205/75R15
Electric
Electrical
Effective Power: 4 KW | Output Frequency: 60 HZ | Output Voltage: 120 V | Output Current 1: 20 A | Generator Rating 1~(Continuous): 4.2 KW | Nominal Current: 15 A | Nominal Voltage: 120 V | Heater, Net output (Diesel): 36 KW
Operational
Operating Speed
Nominal Engine Speed: 1,800 1/min | Throughput per Loop: 1,003 L/hr | Run Time (75% Prime Load): 90 hrs | Fuel Consumption no genset: 3.8 L/hr | Run Time (100%): 68 hrs
Maximum Pressure
Hose Pressure (normal operation): 7.5 bar
Chassis
Hitch/Type
Centrifugal Clutch
Dimensions
Length
3,556 mm
Width
1,930 mm
Height
1,829 mm
Capacities
Fuel Capacity
269 L | Utilizable tank capacity: 258 L
Features
Capacity Air Heat max. (w/acc): 5,765 m3 | Capacity Frost max. (w/acc): 1,045 m2 | Capacity in concrete curing (with accesory): 697 m2 | Cooling Fluid Volume: 2.8 L | Capacity Thaw max (Std): 230 m2| Capacity Thaw max (w/acc.): 350 m2 | Capacity Thaw (Std): 115 m2 | Capacity in Concrete Curing (Standard): 230 m2 | Heat Transfer Fluid (HTF): 204 L | Frost Prevention (Standard): 350 m2
Weights
Weight
Gross Axle Weight Rating: 1,814 Kg | Operating: 1,409 Kg | Dry: 1,510 Kg | Gross Vehicular: 1,440 Kg | Tongue Weight, min.: 116 Kg | Tonge Weight, max.: 134 Kg
Features
Features
Generator Drive: Direct | Quantity Circulation Loops, up: 1 | Number of Hose Reels: 1,0 | Lift Ball - quantity: 1,0